Loctite Henkel Corporation Loctite 37461 RTV Blue Silicone Gasket Maker Part No: 37461
$3.85
Loctite 37461 RTV Blue Silicone Gasket Maker is an 80 mL (2.7 fl oz) tube of sensor-safe, moisture-curing silicone sealant for compatible engine and drivetrain gasketing jobs. It forms a flexible gasket in place, resists common automotive fluids, and helps seal valve covers, timing covers, oil pans, transmission pans, water pumps, and thermostat housings. Henkel lists an intermittent temperature range of -65°F to 500°F and a 24-hour full-strength benchmark under its catalog conditions. Prepare clean surfaces and follow the service procedure for assembly and curing. Order Loctite 37461 from Wofford Truck Parts.
Specifications
Loctite RTV Blue Silicone Gasket Maker, legacy number 37461 and Henkel IDH 491980, is a one-component RTV silicone supplied in an 80 mL tube. The blue sealant cures with atmospheric moisture into a flexible rubber gasket that helps accommodate vibration and thermal cycling. Henkel recommends it for form-in-place gaskets and dressing suitable pre-cut gaskets on valve covers, oil pans, timing covers, water pumps, thermostat housings, and transmission pans. Its automotive catalog identifies sensor-safe performance once fully cured and oil/fluid resistance. The product is not intended for cylinder-head gaskets or gasoline-contact parts; the technical sheet also cautions against oxygen-rich and strong oxidizing environments. Check the assembly service instructions, allow the required cure, and purchase your sealing supplies at Wofford Truck Parts.
Manufacturer: Henkel Corporation
Legacy Part Number: 37461
Manufacturer IDH Number: 491980
Product Name: RTV Blue Silicone Gasket Maker
Product Type: Form-in-Place Silicone Gasket Maker
Product Category: Oil/Fluids/Chemicals
Sub-category: Sealants and Gasket Makers
Product Chemistry: Acetoxy Silicone
Sealant Type: Room Temperature Vulcanizing (RTV)
Physical Form: Paste
Color: Blue
Container Type: Tube
Container Volume: 80 mL
Container Volume in Fluid Ounces: 2.7 fl oz
Mixing Required: No
Curing Mechanism: Atmospheric Moisture
Cured Material: Flexible Silicone Rubber
Sensor Safe: Yes, When Fully Cured
Automotive Fluid Resistance: Yes, Subject to Chemical Compatibility
Motor Oil Resistance: Yes
Transmission Fluid Resistance: Yes
Antifreeze Resistance: Yes
Gasoline Contact Compatibility: Not Recommended
Minimum Listed Temperature: -65°F
Maximum Listed Intermittent Temperature: 500°F
Temperature Range: -65°F to 500°F Intermittent
Typical Operating Temperature Range: -54°C to 204°C (SI 5015 Technical Data Sheet)
Catalog Tack-Free Time: Approximately 30 Minutes
Technical Data Sheet Tack-Free Limit: Up to 60 Minutes Under Specified Conditions
Catalog Full-Strength Benchmark: 24 Hours
Heavy Service Cure Guidance: Follow Technical Data Sheet and Application Requirements
Application: Form-in-Place Gasketing
Additional Application: Dressing Suitable Pre-Cut Gaskets
Typical Application: Valve Covers
Typical Application: Oil Pans
Typical Application: Timing Covers
Typical Application: Transmission Pans
Typical Application: Water Pumps
Typical Application: Thermostat Housings
Head Gasket Applications: Not Recommended
Specific Gravity: 1.04 at 25°C (SI 5015 Technical Data Sheet)
Shore A Hardness: Greater Than 25 After Specified Cure (SI 5015)
Manufacturer Catalog Case Pack: 12 Tubes
Individual Sales Unit: 1 Tube
UPC: 079340374614
ASIN: B0015PK7F2
Country of Origin: United States (Distributor-Listed)
Product Weight: Not Independently Verified
Supplier-Listed Shipping Weight: 0.244 lb
Supplier-Listed Item Length: 7.40 inches
Supplier-Listed Item Width: 1.40 inches
Supplier-Listed Item Height: 1.40 inches
Actual Shipping Carton Dimensions: Not Verified
Condition: New
Unit of Measure: Each
Compatibility
Freightliner Commercial Trucks — Approved Engine and Drivetrain Gasketing Applications
International Commercial Trucks — Approved Engine and Drivetrain Gasketing Applications
Kenworth Commercial Trucks — Approved Engine and Drivetrain Gasketing Applications
Mack Commercial Trucks — Approved Engine and Drivetrain Gasketing Applications
Peterbilt Commercial Trucks — Approved Engine and Drivetrain Gasketing Applications
Volvo Commercial Trucks — Approved Engine and Drivetrain Gasketing Applications
Western Star Commercial Trucks — Approved Engine and Drivetrain Gasketing Applications
Alternative Part Numbers
- Dynatex 49203
- FCP Euro LCT-491980
- Henkel 491980
- Loctite 30560
- Loctite 37461
- NAPA NCB37461
- Permatex 80022